膠帶輸送機

Belt Converyor Series

產品概述：

  本公司生產的膠帶輸送機具有輸送量大、結構簡單、維修方便、部件標準化等優點，它廣泛地應用在礦山冶金煤炭等部門用來輸送松散物料或成件物品，根據輸送工藝要求，可以單臺輸送，也可多臺組成或與其它輸送設備組成水平或傾斜的輸送系統，以滿足不同布置型式的作業線需要。膠帶輸送機可在環境溫度-20℃至+40℃的范圍內使用，輸送物料的溫度在50℃以下。

本公司生產的膠帶輸送機有如下型式：

（一）以傳動型式區分：

1. STDJ 機械傳動系列

它是采用擺線針輪減速機（帶戶外電機）和鏈傳動結構型式。

2. STDJ II 機械傳動系列。

它是由側掛減速器和帶傳動結構型式

3. STD電滾簡傳動系列。

它是采用電滾簡直接傳動型式

（二）以安裝式區分：

1. 固定式系列：直接安裝在地基上

2. SDY系列-移動式系列。

它配有輪胎行走機構和輸送傾角調節裝置，它可根據裝卸作業的要求自由調整。

（三）以結構型式區分：

本公司的膠帶輸送機有槽鋼，框架和衍架三種結構型式。用戶在訂購膠帶輸送機時，需注以帶維修走道和不帶維修走道二種。

The belt conveyers produced by SJLC have following different types:

(1) Divded by Driving Method:

1. STDJ--Mechanical Drive

It is drived by cycloidal pin-wheel reducer(with outdoor motor)and chain-drive mechanism.

2. STDJ II Mechanical Drive Series It adopt upside-down reducer and belt-drive mechanise.

3. STD--Electric Rotor Drive Series

It is drived by electric rotor.

(2) Divded by Installation Method:

1. Fixed Series

It is directly installed on foundayion.

(3) Divided by Structures:

The belt conveyers produced by SJLC have three different structres:

1. U-steel

2. Frarme

3. Truss

NOTE:

This conveyor have two kinds,one with repairing walkway,anotherwithoutrepairingwalkway,when ordering the users shall state it clearly.

BELT CONVEYOR SERIES

The belt conveyers produced by SJLC are consisted of standard parts,they are big in transfer quantity,advanced and simple in structure,easy to,